 |
28.8k = approx. 40 min. to load |
|
56k = approx. 20 min. to load |
|
T1 / ISDN = approx. 4 min. to load |
 |
 |
|
1. Unscrew the nut at
the handle, counterclockwise. |
 |
|
3. Press the little "ball" on
a hard surface, firmly grasping the shaft with both hands,
until the insert detaches from the shaft. |
|
 |
|
2. Open the scissor type handle,
and lift the "ball" out of the cutout area. |
 |
|
4. Pull the insert out of the shaft. Now
you will have 3 separate pieces...a handle, a shaft and an
insert. |
|
 |
|
1. Slide the insert into the
shaft. |
|
|
3. With the jaw closed and
the scissor handle open, place the "ball" into the
cutout area, and squeeze the handle shut. |
|
 |
|
2. Notice the tongue
and groove configuration. The insert should snap firmly
into the shaft. |
 |
|
4. Turn the nut, clockwise,
onto the handle. Now the instrument is ready to use. |
QuickTime and the QuickTime logo are trademarks
of Apple Computer, Inc., registered in the U.S. and other countries.
